Honda Pilot Brake System Problem Won’t Start: Here’s Why

The systems in the car are always intimately connected. Because of this complexity, driving a vehicle becomes much more complex and dangerous when a mechanism fails. Problems like the Honda pilot brake system problem won’t cause a lot of difficulties for your journey.

Even if there is no timely treatment, this error may prevent the engine from running and the vehicle from moving. Therefore, you need to deal with this problem early to avoid problems later.

As mentioned, the systems in the car are highly complex. Therefore, you need to carefully refer to the information about the status of the Honda pilot brake system problem won’t start. From there, there will be a reasonable solution soon.

About Honda pilot safe system

The safety system is the big difference between modern models like the Honda Pilot and previous generation products. This system will control all operations and check if parts are not working as designed. If detected, the system will automatically put the car into lock mode and stop the engine from running. That’s why you won’t be able to move anymore.

Among the many reasons for the safety system to disable the vehicle, brake failure is one of them. The brake is a fundamental mechanism in the operation of the Honda pilot. If it is checked for a problem, the car will never start.

However, no system is perfect or completely predictive. So sometimes, this mechanism also misrecognizes and makes incorrect judgments. You will need to look carefully if you want to determine the problem the car is having.

Honda Pilot Brake System Problem Won't Start

Honda pilot brake system problem won’t start: Common Causes

There are many possible reasons why a vehicle’s safety system may perceive that the brake system is faulty, thereby preventing the vehicle’s entire operation. We can divide it into two groups of the most common causes respectively.

  • Brake problems: In these cases, the system detects faulty brakes and prevents us from starting. If this is the case, then we need to manipulate and repair with mechanisms deep inside the system. Because of the complexity of these parts, there is a high chance that you will have to take the car to a service center or have a mechanic intervene instead of being able to handle it yourself.
  • System problems: If the sensors have a problem or the battery and battery are running low, the alarm system will often misbehave and cause false alarms. That’s why you must look carefully to know if this mechanism locks the car correctly or just mistakenly. The operation and repair will be much simpler if the real problem originates here.

Recommended reading: Squeaking Noise While Driving but Not Brakes Applied

Detailed problems to consider

Below are the details for each one that you can consider, which causes the safety system to lead to the vehicle being unable to move.

Faulty sensor

Safety systems, like other systems, need to rely on an extensive network of sensors. These sensors are susceptible to operation and extremely fragile to impact or temperature impacts. And, of course, when the sensor fails, the car will also understand that the corresponding part has a problem with the vehicle key. If a fault occurs in the brake sensor, the brake system problem won’t happen.

Working with the system and repairing the sensors can be complicated, so it’s best to take it to a repair facility.

Energy problem

If the battery or accumulator runs low, the safety system will fail and make miscalculations more quickly than at full power. 

It is easy to notice because other mechanisms that use battery power will no longer work. To avoid these annoying problems, you must replace the battery or accumulator as soon as possible.

Brake fluid running out or leaking.

Brake fluid is responsible for transmitting the force of your foot pedals to the wheel and brake pads. Without brake fluid, your vehicle won’t be able to stop or slow down. 

Often less brake fluid goes hand in hand with worn brake pads, as the more worn the brake pads are, the more fluid is required to produce the required force. 

If a brake fluid leak occurs, it will be easy to identify through a worse or no brake feeling. Therefore, the test pedal operation will quickly tell us whether the problem is in the brake or not.

Brake pad wear

When you depress the brake pedal, the brake pads press against the rotor or brake drum, slowing the spinning wheels. 

Like the Honda CR-V USB no device connected, this friction creates a force that gradually wears down the pads. The vehicle will issue a message through the brake warning light system when the pads are almost worn out. 

But if you don’t observe and give a reasonable solution, the brake will fail more seriously, and as a result, the car cannot start.

How to detect the problem?

On the Honda pilot, there is a notification mechanism called a brake warning light, and you can rely on the display of the lights to judge. This type will indicate that the fault is highly likely to be with the brakes.

The manufacturer reserves this lamp to sole damage to this part. Of course, there are times when the Brake warning light is incorrect due to system errors. However, the possibility of both mechanisms on the car failing simultaneously is relatively low.

But if you are unsure, you can try to brake on the car to be sure. Usually, the car brake will be very easy to pedal and have good feedback whether we apply solid or weak force on this part. 

However, if there is a problem with the brakes, you will feel the operations have much strange feedback, such as stiffer or no longer rebound as well as usual.

It is easy to detect the problem if you directly look at this aspect. However, if you are new to driving and need experience, this method will cause many difficulties for you.


What does it mean when it says brake system problem?

The warning light can indicate that the handbrake is working or that the brake fluid level is low.

How much does it cost to repair a brake system?

Repairing the entire brake system, including the brake pads, rotor, and calipers, will cost you between $200 and $800, depending on condition and complexity.

What are common brake system problems?

Sound, smell, and feel are all signs of a brake problem. If you notice any signs on the list above, quickly seek out the nearest garage for assistance.

What happens if your brakes stop working while driving?

If you want to stay safe, drive into the least dangerous area. If you can’t find a safe place to pull over, look for a median with grass, open ground, or bushes.


The Honda pilot brake system problem that won’t start is relatively complicated and has many reasons behind it. But don’t worry; take advantage of the knowledge in today’s article to identify and handle these problems fastest.

Leave a Comment