If you’ve ever experienced a rubbing noise when turning at slow speeds while driving your vehicle, then you know how concerning and frustrating it can be.
Not only does it affect the smoothness of your ride, but it can also be a sign of a potentially serious issue with your car’s steering or suspension system.
It’s important to identify the root cause of this noise and address it promptly to prevent further damage and ensure your safety on the road.
In this article, we’ll explore some of the common causes of rubbing noise when turning at slow speeds and what you can do to fix them.
Rubbing Noise When Turning At Slow Speeds: Causes & Fix
A car jerk when slowing down or rubbing noise when turning at slow speeds come from many different causes. Incident locations will have varying degrees of severity. Here are 5 reasons why rubbing sounds appear in your car.
The handlebar bracket is broken
The steering wheel is one of the most important control parts in a car. When it crashes, you will experience rubbing noise when driving and more if you don’t fix it in time. So, what is the cause of the damaged handlebar support?
When the steering oil is contaminated, it will cause the steering part to fail and operate incorrectly. This phenomenon usually occurs after a long period of operation, dirt clings to the vehicle’s parts, accumulates and causes problems for the steering system.
When dirt appears in the car steering wheel, it will increase the friction causing the gears to corrode significantly. When the wear is large, a rubbing sound will appear when you change, turn the steering wheel at low speed.
In addition, if a car has a power steering oil leak or a faulty oil seal, it will cause dirt to accumulate faster and more damage the steering wheel holder. At this point, you need to follow the solution below to stop Rubbing Noise When Turning At Slow Speeds.
Now, if your car rubbing sound when driving slow, you need to stop the car and check the working condition of the oil and steering pump.
Refill the transmission oil and replace the steering pump with a new one if it is excessively corroded. In addition, if the gear and steering wheel appear too much dirt, you need to take the car to the repair shop. The mechanics will assist you in cleaning the steering system of your car.
Worn struts and shocks
Shock absorbers have an important role in controlling the movement of cars. When this part is corroded, it will damage the car and cause noise noise when turning wheel. So, what causes struts and shocks to corrode?
When you move the car continuously on rough and or bumpy roads for a long time, strong shocks will cause the struts to crack, causing the coil spring to break.
Also, another cause of struts corroding is your driving habits. If you use the strut suddenly, it will put more pressure on the part. Over time, the strut will fail, causing rubbing noise when turning left.
When you encounter a situation where your strut is no longer working properly, stop your vehicle and have it checked immediately. You can make this change yourself at home without the help of professionals. Buy the necessary parts for this mission from reputable brands to ensure better quality and protect users on the go.
Power steering oil leak
One of the other reasons why front wheel grinding noise appears due to a leak of power steering fluid or insufficient power steering fluid. In fact, this fluid will act as a kind of lubricant, helping the movement of the steering wheel.
So, in case you see red liquid appearing under the car, you can conclude that power steering oil has leaked outside. So, what causes this to happen?
Poor quality or damaged washers are an indication that power steering fluid has leaked to the outside. After a period of use, the power steering pump part will corrode, it is the cause of all leakage problems.
In addition, when the steering tube is under great pressure for a long time, it will cause this part to break, causing the power steering oil to leak to the outside.
Solution to help you stop humming noise only when accelerating and the rubbing sound that occurs when decelerating is to add the necessary level of fluid to the power steering system.
But if the power steering oil drops suddenly in a short time, you should take the car to have it checked in this case. Get expert help for the best support.
Control arm bushing failed
When the arm bushing fails, you will find it difficult to drive. So, where does the cause come from?
Loose front arm bushing is the first cause of arm bushing not working properly. When your car moves on rough roads, it will cause parts to collide with each other and damage the steering wheel bushing.
The best solution in this case is to replace the damaged parts. In addition, you need to regularly check the bushing by driving at high speed in a variety of conditions. This will help you better spot the problem.
To be sure, you should consult a mechanic. They will assist you to come up with a solution to the less efficient arm bushing. Not only will it help you get back to your car safely, but it will also help put an end to the rubbing sound when turning wheel.
Clogged liquid reservoir
A common cause of a clogged liquid reservoir is that the solution tank has not been cleaned and maintained for a long time. At that time, the oil that accumulates over time will clog the tank. In addition, the dry liquid in the hose will get stuck in the tank lines.
Reservoir maintenance is always the most important solution. The best way is that you should choose a suitable filter, it will help you minimize the pollution and excess oil appearing in the tank.
In addition, you can combine the use of power steering oil with anti-wear agent, it will help the tank to clog and limit the noise when turning.
Why is my car making a rubbing noise when I turn?
When you turn, there are many causes for the sound of rubbing: shock absorbers, damaged swingarm bushings, steering racks or struts are all causes that you cannot ignore. In addition, if your oil tank is clogged or leaking power steering fluid, it is also the cause of the rubbing sound coming from the car.
Why does my car make a noise when I turn at low speed?
Cars often make noise when turning at low speeds. The cause is a joint failure. To fix it, replace the damaged parts. Also, add the required fluid level and replace the fluid in the car.
What does a bad ball joint sound like when turning?
One of the most obvious signs of a worn ball joint is a faint clicking sound. This sound will be louder when you are traveling through rough roads or low places when you are cornering.
Why do I hear a noise when I turn my steering wheel at slow speeds?
The ball joints are responsible for helping the control arms of the suspension system work in conjunction with the steering wheel. This will help you to move more stable and safe. But when the unit is dry, it will make a creaking sound if you turn the steering wheel at low speed.
Hopefully this article will help you better understand rubbing noise when turning at slow speeds. There are many reasons why this happens.
When you realize this phenomenon, you need to stop the car and check for possible causes. If that is not possible, ask for the help of mechanics for assistance in resolving the sound of rubbing that appears on the car when decelerating.
Hello! My name is Byron Hurd – Founder of Wheels Nerd
The boy grew up in the arms of a family who loved cars. From a young age he was exposed to machinery and engine oil at the dairy factory without the family’s car. Growing up with that passion, he gave birth to many articles. written with all love and experience to the reader…