If you’re in the market for a Fusion, it’s important to know which Ford Fusion years to avoid and which ones to opt for.
In this blog post, we’ll discuss the different model years and what you can expect from each one.
We’ll also give you some tips on how to find the best deal on a Ford Fusion.
So, whether you’re looking for a new or used Ford Fusion, read on for information that will help you make the right decision!
Ford Fusion: An Overview
The Ford Fusion is a popular midsize sedan that has been on the market since 2006. It’s known for its comfortable ride, spacious interior, and fuel-efficient engines.
There are three different engine options available on the Fusion, including a hybrid powertrain. All-wheel drive is also available on some trim levels. The Fusion has a starting price of around $24,000, which makes it a good value in its class.
While the Fusion has a lot going for it, there are some drawbacks to keep in mind. The cabin can be noisy at highway speeds, and the infotainment system can be difficult to use.
Additionally, the Fusion doesn’t have the same level of athleticism as some of its competitors. If you’re looking for a sporty sedan, the Fusion might not be the best option.
Also Read: Is Ford Fusion a good car? Check out here.
Ford Fusion Years to avoid
Here are five Ford Fusion years to avoid,
- 2010
- 2011
- 2012
- 2013
- 2014
Problems with Ford Fusion 2010
The 2010 Ford Fusion has been plagued with a number of problems, many of which have been attributed to poor quality control. One of the most common issues is premature wear of the brakes, which can lead to increased stopping distances and reduced safety.
Another problem that has been reported is excessive vibration from the engine, which can make the car difficult to drive.
In addition, there have been reports of electrical problems, including flickering lights and malfunctioning power windows.
While Ford has issued a number of recalls for these and other issues, many owners have complained that the repairs are inadequate and that the problems persist.
As a result, the 2010 Ford Fusion has earned a reputation as being one of the least reliable cars on the road.
Also Read: Ford Escape Years to Avoid (Avoid these models)
Problems with Ford Fusion 2011
The 2011 Ford Fusion has been plagued by a number of problems, ranging from engine issues to electrical problems.
One of the most common issues is with the engine, which has been known to stall without warning. This can be extremely dangerous, as it can happen while the car is in motion.
In addition, the car has also been known to have issues with the brakes, which can cause accidents.
The electrical system has also been known to fail, causing the car to lose power and amenities like the radio and air conditioning.
As a result, owners of the 2011 Ford Fusion have had to deal with a number of serious problems.
Also Read: Ford Edge Years to Avoid (Avoid these models)
Problems with Ford Fusion 2012
Since it was first introduced in the 2012, this Ford Fusion has been plagued by a number of problems.
The most common problems with this model are transmission issues, steering problems and interior accessories problems wheread other small problems include AC/Heater problems, Engine Problems, electrical problems and brakes problems.
If you do own one of these cars, it’s important to stay up-to-date on recalls and service bulletins, and to take your car to an authorized dealer for any repairs. With proper care, your Fusion can still be a safe and reliable vehicle. But given the number of reported problems, it’s important to be aware of the potential risks.
Problems with Ford Fusion 2013
In 2014, Ford issued a recall for the Fusion due to a fire risk associated with the car’s 1.6-liter engine. In 2015, the National Highway Traffic Safety Administration launched an investigation into the Fusion after receiving reports of the car’s steering system suddenly failing.
And in 2016, Ford issued another recall for the Fusion after discovering that the car’s door latches could fail and cause the doors to open while the car is in motion. While Ford has taken steps to address these issues, the recalls have caused many owners to lose confidence in the safety of their vehicle.
Also Read: Ford Explorer Years to Avoid (Avoid these years)
Problems with Ford Fusion 2014
One common issue is that the transmission can slip out of gear, especially when accelerating from a stop. This can be both dangerous and frustrating, and it can lead to expensive repairs and accidents.
Another problem that has been reported is engine stalling. This can happen when the car is idling or when driving at low speeds, and it can be very dangerous. It can also be caused by a faulty sensor, so if you’re having this issue, it’s best to take your car to a mechanic for diagnosis.
Finally, many people have reported problems with the touchscreen infotainment system. The system can be slow to respond and sometimes freezes completely, which can be very frustrating. Despite these issues, the 2014 Ford Fusion is still a great car. But if you’re considering buying one, it’s important to be aware of these potential problems.
Common issues with Ford Fusion
One issue that has been noted is excessive oil consumption. This can be caused by a number of factors, including an improperly installed oil filter or oil pan gasket. In some cases, it may also be necessary to replace the piston rings.
Another common problem with Fusion is transmission failure. This can be caused by a leak in the transmission fluid cooler, faulty shift solenoids, or a problem with the torque converter. In some cases, it may be necessary to have the entire transmission replaced.
Here are some issues with Ford Fusion,
#1. Steering problems
In 2016, Ford issued a recall for over half a million Fusions after reports that the power steering could fail suddenly. The problem was linked to a software issue, and Ford offered to update the software for free. However, many owners reported that the problem persisted even after the update was applied.
In 2019, Ford issued another recall for the Fusion after reports that the steering wheel could come loose while driving.
This time, the problem was linked to a faulty bolt. Ford offered to inspect and repair the affected vehicles for free.
Despite these recalls, Ford Fusion is still a popular sedan. But if you’re considering buying one, it’s important to be aware of these potential problems.
#2. Transmission problems
Many Ford Fusion owners have reported transmission shifting issues with their vehicles. These problems typically surface when the car is cold, and can lead to a sudden loss of power or even a complete stall.
In some cases, the car may roll backwards when stopped on an incline. While these shifting issues can be frustrating, there are a few things that you can do to help mitigate the problem.
First, make sure that your transmission fluid is at the correct level and quality. If it is low, top it off and consider getting the system flushed and refilled.
You should also check the transmission filter to see if it needs to be replaced. If you have done all of these things and the shifting issues persist, you may need to take your car to a mechanic for further diagnosis.
#3. Swollen lug nuts
Owners of Ford Fusion vehicles have reported issues with swollen lug nuts. This can cause the lug nuts to become impossible to remove, even with a wrench.
In some cases, the only way to remove the lug nuts is to use a drill. Swollen lug nuts can be caused by a variety of factors, including over-tightening, exposure to moisture, and corrosion.
While Ford has issued a service bulletin, there is no permanent fix for the problem. As a result, owners of Ford Fusion vehicles should be aware of the potential for swollen lug nuts and take precautions to prevent them.
Frequently Asked Questions
Which Ford Fusion Year is the most reliable?
The most reliable Ford Fusions happen to be 2012 and 2013 models. During these two years, Ford work a lot and emphasized hugely on the production quality of Fusions that resulted in better quality and cost efficient models.
What year Ford Fusions have transmission problems?
There are many Ford Fusion models that have this problem and it seems Ford had hard time fixing these issues. 2010, 2012 and 2013 were the models most affected by these problems.
Are Ford Fusions unreliable?
No! Ford Fusion is not an unrealible car. Yes it has problems but at the same time it proved to be one of the best and likeable Fords in the market. It has reliability score of 87 out of 100.
How long do Ford Fusions usually last?
A well maintained Ford Fusion can last for upto 200,000 miles. That means it can last for more than 17 years if you drive an average of 12,000 miles every year.
Is the Ford Fusion 2.5 a good engine?
Yes it is one of the most reliable and cost effective engine in the market. Parts are easily accessible and almost every auto mechanic can fix it.